LARGE DIGITAL TEMPERATURE AND HUMIDITY DISPLAYS

These Large Digital LED Displays combine Temperature and Humidity on two separate displays in a single case with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.

Large Humidity and Temperature Display with Sensor in built

DUAL CIRCUIT INPUT,   4~20mA or 0-10Vdc or Remote sensor Inputs

Alarms and Retransmission Output options,   Analogue,  Voltage or Serial 

These displays combine Temperature and Humidity on two separate displays ( in a single case ) with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.

The 4~20mA sensor protrudes into the AIR from the bottom of the case.

Humidity and Temperature sensor
Humidity and Temperature sensor

LARGE DIGITAL LED TEMPERATURE AND HUMIDITY DISPLAYS – Features and Options

  • Digit heights, 2.3”, 4.0”, 6.0”, 8.0”, 12.0”, 14.0”, 16.0”, 18.0”
  • Scale ranges
    • TEMPERATURE  0~99 °C / 32~210 °F,   0~99.9 °C / 32~212 °F
    • HUMIDITY           0~99  %  or  ( RH Legend )
  • Indoor or Outdoor
  • Wall or Suspension mounting
  • 95~265Vac, 24Vdc  or  12Vdc power input options
  • Input options 4~20mA or 0-10Vdc
  • Red or Green LED options ( consult sales office )
  • Alarm or Retransmission Output options

LARGE DIGITAL LED TEMPERATURE AND HUMIDITY DISPLAYS – VIEWING DISTANCES

The viewing distances shown below are true to the LED manufacturers specifications and will give CLEAR UNAMBIGUOUS READING – They are NOT to be taken as Maximum distances.

We have given a fair distance chart below for consideration.

DIGIT HEIGHTS

VIEWING DISTANCES

ActualGuide Only
2.3” (58mm)15 meters / 50 feet
4” (102mm)35 meters / 115 feet
6” (150mm)55 meters / 180 feet
8” (203mm)75 meters / 246 feet
12” (305mm)115 meters / 377 feet
14″ (355mm)135 meters /442 feet
16” (400mm)155 meters / 508 feet
18″ (457 mm)170 metres / 557 feet

LARGE DIGITAL LED TEMPERATURE AND HUMIDITY DISPLAYS – MOUNTING OPTIONS

LED DISPLAY WALL MOUNTING

Wall mounting cases up to 6” high digits are supplied with side brackets that can rotate in their mounting to enable the display to be ‘ TILTED ‘.    8” high digit displays and above are normally supplied with four welded corner brackets for direct fixing to a wall.   The reason for the difference is purely weight.   If an 8” high digits displays only has 2 or 3 digits and single line,   it too can have side adjusting brackets.  12” and above are always with fixed.

Wall mounting diagram

LED DISPLAY SUSPENSION MOUNTING

This method of mounting is popular for Double Sided or Multiline displays which have to be seen by a section of workers.   Several suspension mounting displays can be installed in a work area.   Dimensions are not given here as they vary according to Digit Height, Number of Digits and Number of Lines as well as whether the Large Display is Single or Double sided.

Large digit display case Suspension Mounting with Chains
Suspension Picture Example Only

Specification Sheets

Our specification sheets provide you with all the information contained on this web page in a PDF printable form. 

To download a specification sheet complete the CONTACT FORM below and if you tick the box requesting a specification sheet then you will be directed to the downloads page.

How Can We Help? 

Whatever your Large Digit LED Display requirements are we are sure we can help. Contact Us Now for further information.

To help us provide a realistic quotation we will need as much of the following information as possible.

Not what you are looking for?

Here is our full range of Large Digital LED Displays

A to D (Analogue to Digital) Displays

Our LED Digital A to D Displays accept all standard industrial input signals Voltage and Current and all are  scalable. 

These LED displays will display any engineering units with decimal point position programmable.

Counters and Rate Displays

Our LED Digital Counters will accept standard input signals, contact closure, 24Vdc, NPN, PNP, Quadrature.

UP or DOWN, BATCH or TOTALISING count,  single line or multiline.

Timers and Totalisers

All Timers have a Time base in Hours, Minutes, Seconds and combinations. Long Range Timers with Years, Weeks and Days are also available. 

Typical functions are UP or DOWN timing, Totalising or Batch timing, TAKT timing, Repeat Cycle, One-Shot output.

Industrial Temperature Displays

These displays accept Industry Standard Thermocouple Inputs and 2/3 wire PT100/RTD sensors.   With a wide range of Temperature scale ranges in °C or °F.

Temperature and Humidity Displays

These Large Digital LED Displays combine Temperature and Humidity on two separate displays in a single case with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.